Zhenjiang Chunhuan Sealing Materials Co., Ltd.
Zhenjiang Chunhuan Sealing Materials Co., Ltd(Group)
Add to Cart
100% Virgin White Color PTFE Molded Round Bar Rod Dia 4mm ~ 850mm
DESCRIPTION
PTFE has the best chemical resistance of all known plastic.It has the lowest coefficient of friction of all known solid materials and a wide range of practicable temperature from -180°c~+260°c.
PTFE Rod is manufactured in two distinct ways:
ADVANTAGE
TYPES AND SPECIFICATION
| Diameter(mm) | Dia. Tolerance(mm) | Length(mm) | Length Tolerance(mm) |
| 4~9 | +0.48~0.58 | 1000/2000 | +10.0
|
| 10~50 | +1.1~1.6 | 1000/2000 | |
| 55~200 | +2.0~5.0 | 1000/2000 | |
| 4ft,or as request |
MAIN PROPERTIES OF PTFE ROD
| Item | ASTM | Data | Unit |
| Mechanical Properties | |||
| Density | D792 | 2.1~ 2.2 | g/m3 |
| Tensile strength | D638 | ≥25 about 25 ~ 45 | MPa |
| Elongation at break | D638 | ≥150 about 200~ 350 | % |
| Compression strength | D695 | 24 | MPa |
| Shore D Hardness | D636 | 50-60 | - |
| Friction coefficient | on steel | 0.01 | - |
♦ Corrosion resistance: widely used in all chemical containers and parts which contacted with corrosive media, such as tanks, reactors, equipment lining, valves, pumps, fittings, filter materials, separation materials and pipe for corrosive fluids.
♦ Abrasion resistance: can be used as a self lubricating bearing, piston rings, seal rings, gaskets, valve seats, sliders and rails etc..
♦ Insulation materials: mainly used in the manufacture of various products with high temperature resistance, high-frequency resistance, electrical insulation and arc resistance, such as high-frequency cables, moisture-resistant cables, capacitor coils, insulating cover for wire, etc..
♦ Medical materials: such as artificial blood vessels, heart, esophagus, peritoneum, heart devices, a variety of intubation tubes and catheters.
♦ Non-stick materials: can be used for non-stick coating such as non-stick pan and non-stick roller for food processor.
INFORMATION ABOUT OUR FACTORY
Our Service
1) Your inquiry will be replied within 2 hours during working time,Within 24hours when rest time.
2) Our working time is 7.30 AM --17:30 PM,Monday to Saturday.
3) General samples time can be arranged within 2--5days.
4) Orders will be produced exactly as request and approved samples.
5) When mass production,we send photos to show the production line.And confirm the estimate time again.
6) At the end of mass production,photos and samples will send to you for approval.You can arrange the inspection.
7) Before shipment,our QC will have inspection to make sure the quality.
8) We always try best to ensure every order to delivery in time.
Payment Terms
1) T/T,Cash,L/C.
2) 30% deposit,70% balance before shipment.
3) Lead time: 15 days after received deposited for 2tons.
4) Delivery way: By sea,By air, By EMS,DHL,UPS,TNT,FedEx.